Winter 2011 / 2012
2 complete drive shaft assemblies designed to fit with Sun Speed motor mounts for engines up to to 300 hp. Note: the axle shaft lengths can be special ordered to fit any Honda conversion. Includes:
Chromoly steel axle shafts,
both in-board tripod joints and out-board CV joints,
rubber boots,
rings, circlips, bands
all purpose grease / lube.
preparation and assembly instructions
Note - Sun Speed outboard CV's do not have speedometer pick-up. Sun Speed Wiring Kit takes speedometer signal from the Honda VSS.
Price $800.00 USD + shipping
Options:
All of the drive shaft components can be purchased separately including different axle lengths. Specify S1 or S2 version and left side, right side.
boots, CV's, tripods, etc. available as spares. Inquire.
NEO high temperature grease HPCC#1 for CV and tripod.
road racing upgrades ¹
Engines > 300 hp Complete set - POA
¹ Optional Road Racing Upgrade
If you will be racing your car consider that the CV is bolted directly to the rear rotor. On extreme tracks it can get the internals of the CV to well over 300 Fº The problem, after 300 Fº most grease will vaporize and blow the boot up like a balloon causing it to rub on the suspension ripping the boot and ending the race. We have created a Road Racing upgrade that will eliminate this problem. First we polish and match all the internals so the CV is pre-broken in. We then use a high grade synthetic grease specially formulated for this applicatione.g. NEO. We have developed a higher durometer boot and vented them so if the higher temperature is achieved it will just let the gas out of the boot and not expand it. With all this in place the axles will hold up to the most demanding tracks. Please remember the axles without this package will handle most track days. This extreme Road Rage package is designed for an all out race car that will see continuous extreme track days.